OneBlade | Replaceable Blades | Includes 2 Replaceable Blades | QP220/51

You can quickly replace the blade of your OneBlade when it no longer provides great shaving results by following the instructions below.

A video is provided at the bottom of this article to provide further guidance.
Models without a blade release slide switch
Attach the blade to the handle by pressing both edges of the blade and inserting it into the handle until it clicks into place.
To remove the blade from the handle, press both edges of the blade and lift it off the handle.
OneBlade No Release Button
Models with a blade release slide switch
Switch your OneBlade off and carefully push the blade release switch upwards while holding the blade on both sides.
Properly dispose of the used blade.
Remove the replacement blade from the package. Be mindful, as the edges of the blade are sharp.
Press the new blade on both sides and insert it into the handle until you hear a "click."
OneBlade Release Button
Video: replacing the blade of your Philips OneBlade
The first model shown does not have a blade release slide switch.
The second model shown does have a blade release slide switch.
The information on this page applies to the following models: QP1624/10, QP1424/10, QP6550/15.

Different countries may use different voltages in their electrical devices. Not using compatible voltage can damage of your device.

Always check if your product’s adapter is suitable for certain voltages, by checking the specifications of Philips adapter provided with your product.

Our adapters have automatic voltage selection and will show 100 to 240 volts printed on the adapter. This means the adapter is suitable for mains voltages ranging from 100 to 240 volts.


Plug
Even if two countries operate on the same voltage or your adapter is suitable for the voltage used, plugs abroad can have different shapes. Check the type of plug of the country you are visiting. For example, the rectangular US plug does not fit the round shaped European receptacle. A travel adapter will allow you only to plug your appliance into another type of outlet.

Note: Our shavers with build-in revolving pins like: PQ182 and PQ190 are only suitable for mains voltages of 220V.
The information on this page applies to the following models: MG5930/65, MG9551/65, MG7920/65.

Both the Philips OneBlade and the OneBlade Pro can be used to shave your beard and mustache, providing you with a quick and easy clean-shaven look.

Note: Philips OneBlade is designed to trim and shave facial and body hair. It is not intended for trimming or shaving the hair on your head (scalp). Please refer to Philips' selection of hair clippers and multi-groomers to find a product suitable for scalp hair.
Shaving with the Philips OneBlade or OneBlade Pro
Below you will find step-by-step instructions to shave using your Philips OneBlade or OneBlade Pro. Be sure to remove any combs or guards from the appliance before you begin.
Switch on the appliance.
Gently but firmly place the flat surface of the blade against your skin.
For best results, make long, smooth strokes with the appliance, against the direction of hair growth. Note that not all hairs grow in the same direction, so you may need to make strokes in a number of directions to catch all of them.
For a clean shaven look, ensure you shave your face and neck, including any hairs that grow behind your jawline (to check, try turning your head from side to side while looking in a mirror).
Clean your OneBlade under the tap with warm water after every use, and allow it to air dry.

The information on this page applies to the following models: QP6550/15, QP2620/10, QP210/51.